What this construction is
A two-tier box has a removable upper tray sitting above a lower compartment, so a set is shown in layers rather than crowded onto one surface. Lifting the top tray is the second half of the reveal.
Leather on this construction, specifically
A hide-wrapped tray with a ribbon pull is the traditional bridal set build. The ribbon is not decoration — it is what lifts the tray, and it should be specified with the same care as the interior.
Getting the fit right
The upper tray needs a finger recess or a ribbon pull, and the lower compartment has to be deep enough that the tray does not sit on the pieces below it. Both are easy to get wrong on a drawing and obvious on a sample.
The mistake to avoid
A tray with nothing to lift it by is the standard fault. Customers end up tipping the box out, which is the opposite of what a two-tier box is for.
Where it is used
Bridal and gift sets, watch-and-strap sets, and any programme where a customer receives several pieces that should not be seen all at once.
Why leather
Real leather has variation in it — a slight difference in grain and in depth of colour from hide to hide. That is the point of it, and it is also the thing to decide before you commit to a house box.
Putting your logo on leather
Leather holds a deep blind deboss beautifully and takes foil well, though foil on a heavily grained hide will break slightly along the grain — usually read as character rather than fault.
Cutting the interior in leather
Leather is wrapped over a rigid shell. The shell defines the geometry; the leather gives the surface.
Keep out of direct sun. A leather conditioner once a year on a display piece; nothing at all on a box that ships.
What we need from you
| What we need | Why |
|---|---|
| Piece dimensions | Sets the interior |
| Leather colour | Matched to a Pantone reference or a swatch |
| Logo artwork | Vector gives the cleanest die or screen |
| Leather on this construction | A hide-wrapped tray with a ribbon pull is the traditional bridal set build. |
Frequently asked questions
Is leather a good choice for a two-tier box?
A hide-wrapped tray with a ribbon pull is the traditional bridal set build. The ribbon is not decoration — it is what lifts the tray, and it should be specified with the same care as the interior.
How does leather wear on this construction?
Keep out of direct sun. A leather conditioner once a year on a display piece; nothing at all on a box that ships.
Can it be made in our colour?
Yes — the leather is matched to a Pantone reference or a physical swatch, and confirmed on a sample.
What logo methods suit leather?
Leather holds a deep blind deboss beautifully and takes foil well, though foil on a heavily grained hide will break slightly along the grain — usually read as character rather than fault.
Can I see it before ordering?
Yes. A physical pre-production sample is made to your specification and the bulk run is held to the sample you approve.
Make your two-tier boxes
Tell us the piece, your brand and the quantity you have in mind. We’ll send photos of our work and one clear, all-in quote.