What this construction is
A slip-lid box is two separate pieces: a base and a lid that slides down over it. There is no hinge and nothing to break, and the lid can be lifted straight off so the piece is seen with nothing behind it.
Lacquered wood on this construction, specifically
A lacquered slip-lid is the most demanding fit we make, because neither part gives at all. The tolerance is tight and it must be approved on a physical sample; a drawing cannot settle it.
Getting the fit right
The fit between lid and base is the whole specification. Too tight and the customer struggles; too loose and the lid comes off in a bag. The tolerance is small and it changes with the thickness of the covering, which is why it is set on a physical sample rather than on a drawing.
The mistake to avoid
Wrapping a slip-lid in a thick material without adjusting the base is the standard error. The lid then will not go down, and the fix is a new die rather than an adjustment.
Where it is used
Posted goods, premium presentation and anywhere the box has to look the same from every side. It is also the construction that stacks best in storage.
Why lacquered wood
A wood carcass built up in layers of lacquer and polished back to a piano finish. This is the heaviest and most formal thing we make.
Putting your logo on lacquered wood
Lacquer is engraved, or carries an inlaid metal plate. Foil does not bond reliably to a polished lacquer surface.
Cutting the interior in lacquered wood
The interior is a separate lined tray dropped into the carcass, so the lining material is chosen independently of the shell.
Dust with a dry microfibre cloth. Polish only with a product made for lacquer.
What we need from you
| What we need | Why |
|---|---|
| Piece dimensions | Sets the interior |
| Lacquered wood colour | Matched to a Pantone reference or a swatch |
| Logo artwork | Vector gives the cleanest die or screen |
| Lacquered wood on this construction | A lacquered slip-lid is the most demanding fit we make, because neither part gives at all. |
Frequently asked questions
Is lacquered wood a good choice for a slip-lid box?
A lacquered slip-lid is the most demanding fit we make, because neither part gives at all. The tolerance is tight and it must be approved on a physical sample; a drawing cannot settle it.
How does lacquered wood wear on this construction?
Dust with a dry microfibre cloth. Polish only with a product made for lacquer.
Can it be made in our colour?
Yes — the lacquered wood is matched to a Pantone reference or a physical swatch, and confirmed on a sample.
What logo methods suit lacquered wood?
Lacquer is engraved, or carries an inlaid metal plate. Foil does not bond reliably to a polished lacquer surface.
Can I see it before ordering?
Yes. A physical pre-production sample is made to your specification and the bulk run is held to the sample you approve.
Make your slip-lid boxes
Tell us the piece, your brand and the quantity you have in mind. We’ll send photos of our work and one clear, all-in quote.