What it does
A brooch stand is an upright faced panel that a brooch pins into, so the piece is seen face-on at eye level rather than lying flat where it reads as a disc.
Lacquered wood on a brooch stand, specifically
Wood gives the rigid upright a brooch stand needs, but the pin cannot go into it. The face carries a replaceable fabric panel, which is the part that wears.
Getting the proportion right
The panel has to be soft enough to take a pin and firm enough to hold one. That means a faced board rather than a hard surface, and it means the facing is the working part of the display rather than a covering.
How wood display is made
Wood is machined and finished rather than covered, so the shape is cut from solid or from a veneered core and then sealed. That makes tolerances tighter than on a wrapped form, and it makes changes after tooling more expensive.
Where it is used
Antique and estate counters, where brooches are a real category, and window work where a single important piece is being shown face-on.
Wood under case lighting
A satin-sealed wood surface throws a soft reflection that reads warm, which flatters gold and works against platinum. A matt seal removes most of that and is the safer specification for a mixed-metal case.
The mistake to avoid
Repeated pinning in the same place wears a hole that shows when the piece is lifted out. A replaceable faced panel solves it; a permanently covered one has to be replaced whole.
Why lacquered wood
Lacquered wood display has weight and it makes a sound when it is set down. It reads as furniture rather than as a prop.
Dust dry. A gloss lacquer shows fingerprints under window lighting; a satin lacquer does not.
What we need from you
| What we need | Why |
|---|---|
| Height and footprint | The panel has to be soft enough to take a pin and firm enough to hold one. |
| Lacquered wood colour | Matched to a Pantone reference or a swatch |
| Lacquered wood on this form | Wood gives the rigid upright a brooch stand needs, but the pin cannot go into it. |
Frequently asked questions
Can brooch stands be made in our brand colour?
Yes — the lacquered wood is matched to a Pantone reference or a physical swatch, and confirmed on a sample.
What sizes do brooch stands come in?
They are made to your dimensions. The panel has to be soft enough to take a pin and firm enough to hold one. That means a faced board rather than a hard surface, and it means the facing is the working part of the display rather than a covering.
Is lacquered wood a good choice for a brooch stand?
Wood gives the rigid upright a brooch stand needs, but the pin cannot go into it. The face carries a replaceable fabric panel, which is the part that wears.
What goes wrong most often with brooch stands?
Repeated pinning in the same place wears a hole that shows when the piece is lifted out. A replaceable faced panel solves it; a permanently covered one has to be replaced whole.
Can brooch stands be made to match our boxes?
Yes — the same lacquered wood and the same colour across boxes and display, ordered in one run.
Specify your brooch stands
Tell us your case or window height, what the brooch stands have to show, and your brand colour. We’ll send photos of our work and one clear, all-in quote.