What it does
A brooch stand is an upright faced panel that a brooch pins into, so the piece is seen face-on at eye level rather than lying flat where it reads as a disc.
Microfibre suede on a brooch stand, specifically
Microfibre suede takes a pin and closes behind it almost as well as velvet, with a flatter, more contemporary look. On a modern counter it is the usual choice.
Getting the proportion right
The panel has to be soft enough to take a pin and firm enough to hold one. That means a faced board rather than a hard surface, and it means the facing is the working part of the display rather than a covering.
How microfibre suede is applied to a display form
Microfibre suede has a short, even nap and no grain direction to match, so it wraps a compound curve more cleanly than velvet and shows fewer joins. That makes it the default on shaped forms.
Where it is used
Antique and estate counters, where brooches are a real category, and window work where a single important piece is being shown face-on.
Suede under case lighting
Suede reads matte and even, with none of the sheen shift you get across velvet as you move around a case. Under LED spots it holds one tone from every viewing angle, which is why window dressers ask for it.
The mistake to avoid
Repeated pinning in the same place wears a hole that shows when the piece is lifted out. A replaceable faced panel solves it; a permanently covered one has to be replaced whole.
Why microfibre suede
Microfibre suede is the working surface of most modern counters. Short nap, matte, and it does not shed onto a polished piece.
Brush with the nap. It recovers from handling better than velvet and is the safer choice for display that is moved every day.
What we need from you
| What we need | Why |
|---|---|
| Height and footprint | The panel has to be soft enough to take a pin and firm enough to hold one. |
| Microfibre suede colour | Matched to a Pantone reference or a swatch |
| Microfibre suede on this form | Microfibre suede takes a pin and closes behind it almost as well as velvet, with a flatter, more contemporary look. |
Frequently asked questions
Can brooch stands be made in our brand colour?
Yes — the microfibre suede is matched to a Pantone reference or a physical swatch, and confirmed on a sample.
What sizes do brooch stands come in?
They are made to your dimensions. The panel has to be soft enough to take a pin and firm enough to hold one. That means a faced board rather than a hard surface, and it means the facing is the working part of the display rather than a covering.
Is microfibre suede a good choice for a brooch stand?
Microfibre suede takes a pin and closes behind it almost as well as velvet, with a flatter, more contemporary look. On a modern counter it is the usual choice.
What goes wrong most often with brooch stands?
Repeated pinning in the same place wears a hole that shows when the piece is lifted out. A replaceable faced panel solves it; a permanently covered one has to be replaced whole.
Can brooch stands be made to match our boxes?
Yes — the same microfibre suede and the same colour across boxes and display, ordered in one run.
Specify your brooch stands
Tell us your case or window height, what the brooch stands have to show, and your brand colour. We’ll send photos of our work and one clear, all-in quote.