What this construction is
A cylinder box is a rolled tube with a fitted lid, and it presents a piece with no corners anywhere. A bangle, a coiled chain or a rolled bracelet sits in it the way it is worn, which a square box cannot do without wasted space.
Microfibre suede on this construction, specifically
Suede wraps a tube with almost no visible seam, because the short nap does not shift tone around the curve. Of the fabrics it is the one that makes a cylinder look like a single piece.
Getting the fit right
Wall thickness and the lid fit are set together — a rolled wall flexes slightly, so a lid that fits a rigid box will be either tight or loose on a tube. The fit is confirmed on a physical sample, always.
The mistake to avoid
A cylinder rolls. Without a flat, a foot or a base pad it will not stay where it is put on a counter, and that is a design decision rather than something to solve later with a stand.
Where it is used
Bangles, coiled chains, rolled bracelets and gift sets, plus anywhere a brand wants a shape that stands out among rectangles on a shelf.
Why microfibre suede
Microfibre suede is a woven synthetic with a short, dense nap. It has the hand of real suede without the shading and water-marking that real suede brings, and it does not shed onto a polished piece.
Putting your logo on microfibre suede
Suede takes a hot-stamped or blind-debossed logo cleanly, because the nap compresses and holds the impression. Fine serifs need a slightly heavier die than they would on board, or the nap springs back and softens the edge.
Cutting the interior in microfibre suede
Inserts are cut a fraction under size on each face; the pile closes the gap and grips the piece without a visible squeeze.
Brush with the nap, never against it. Marks from a fingernail lift with a soft brush. It does not craze or crack with age.
What we need from you
| What we need | Why |
|---|---|
| Piece dimensions | Sets the interior |
| Microfibre suede colour | Matched to a Pantone reference or a swatch |
| Logo artwork | Vector gives the cleanest die or screen |
| Microfibre suede on this construction | Suede wraps a tube with almost no visible seam, because the short nap does not shift tone around the curve. |
Frequently asked questions
Is microfibre suede a good choice for a cylinder box?
Suede wraps a tube with almost no visible seam, because the short nap does not shift tone around the curve. Of the fabrics it is the one that makes a cylinder look like a single piece.
How does microfibre suede wear on this construction?
Brush with the nap, never against it. Marks from a fingernail lift with a soft brush. It does not craze or crack with age.
Can it be made in our colour?
Yes — the microfibre suede is matched to a Pantone reference or a physical swatch, and confirmed on a sample.
What logo methods suit microfibre suede?
Suede takes a hot-stamped or blind-debossed logo cleanly, because the nap compresses and holds the impression. Fine serifs need a slightly heavier die than they would on board, or the nap springs back and softens the edge.
Can I see it before ordering?
Yes. A physical pre-production sample is made to your specification and the bulk run is held to the sample you approve.
Make your cylinder boxes
Tell us the piece, your brand and the quantity you have in mind. We’ll send photos of our work and one clear, all-in quote.