What it does
A ring ladder is a stepped upright with a slot on each step, so a row of rings is shown one above another rather than side by side. It puts a range into a narrow footprint and lets every ring be seen from the front.
Lacquered wood on a ring ladder, specifically
A machined wooden ladder holds exact step heights across a whole set and repeats them on a reorder, which a built-up wrapped ladder does not. Face the slots or the shanks rub on a hard edge.
Getting the proportion right
Step depth and slot pitch together decide how many rings fit and whether the upper ones shadow the lower. A steeper ladder fits more and shows less; a shallower one shows every ring but takes more case height.
How wood display is made
Wood is machined and finished rather than covered, so the shape is cut from solid or from a veneered core and then sealed. That makes tolerances tighter than on a wrapped form, and it makes changes after tooling more expensive.
Where it is used
Narrow counter cases and window columns where floor space is tight, and anywhere a graded range has to be read top to bottom.
Wood under case lighting
A satin-sealed wood surface throws a soft reflection that reads warm, which flatters gold and works against platinum. A matt seal removes most of that and is the safer specification for a mixed-metal case.
The mistake to avoid
A ladder cut for plain bands will not take the same range once a set stone is added — the stone fouls the step above. Cut the steps to the tallest setting in the range, not the average.
Why lacquered wood
Lacquered wood display has weight and it makes a sound when it is set down. It reads as furniture rather than as a prop.
Dust dry. A gloss lacquer shows fingerprints under window lighting; a satin lacquer does not.
What we need from you
| What we need | Why |
|---|---|
| Height and footprint | Step depth and slot pitch together decide how many rings fit and whether the upper ones shadow the lower. |
| Lacquered wood colour | Matched to a Pantone reference or a swatch |
| Lacquered wood on this form | A machined wooden ladder holds exact step heights across a whole set and repeats them on a reorder, which a built-up wrapped ladder does not. |
Frequently asked questions
Can ring ladders be made in our brand colour?
Yes — the lacquered wood is matched to a Pantone reference or a physical swatch, and confirmed on a sample.
What sizes do ring ladders come in?
They are made to your dimensions. Step depth and slot pitch together decide how many rings fit and whether the upper ones shadow the lower. A steeper ladder fits more and shows less; a shallower one shows every ring but takes more case height.
Is lacquered wood a good choice for a ring ladder?
A machined wooden ladder holds exact step heights across a whole set and repeats them on a reorder, which a built-up wrapped ladder does not. Face the slots or the shanks rub on a hard edge.
What goes wrong most often with ring ladders?
A ladder cut for plain bands will not take the same range once a set stone is added — the stone fouls the step above. Cut the steps to the tallest setting in the range, not the average.
Can ring ladders be made to match our boxes?
Yes — the same lacquered wood and the same colour across boxes and display, ordered in one run.
Specify your ring ladders
Tell us your case or window height, what the ring ladders have to show, and your brand colour. We’ll send photos of our work and one clear, all-in quote.