What it does
A ring ladder is a stepped upright with a slot on each step, so a row of rings is shown one above another rather than side by side. It puts a range into a narrow footprint and lets every ring be seen from the front.
Leatherette on a ring ladder, specifically
Each step edge has to be turned under rather than cut, which is slow and gives the sharpest ladder we make. Rings sit by shape rather than friction, so the slot width has to be right the first time.
Getting the proportion right
Step depth and slot pitch together decide how many rings fit and whether the upper ones shadow the lower. A steeper ladder fits more and shows less; a shallower one shows every ring but takes more case height.
How leatherette is applied to a display form
Leatherette is wrapped and its edges are turned under, so every visible edge is a folded edge rather than a cut one. It will not stretch far, so a tight compound curve is built up in sections with the joins placed where they face away from the customer.
Where it is used
Narrow counter cases and window columns where floor space is tight, and anywhere a graded range has to be read top to bottom.
Leatherette under case lighting
It has a slight sheen, so a strong spot will show a highlight along the top of a riser. That is usually flattering on a plain block and unflattering on a curved bust, which is worth knowing before you specify it.
The mistake to avoid
A ladder cut for plain bands will not take the same range once a set stone is added — the stone fouls the step above. Cut the steps to the tallest setting in the range, not the average.
Why leatherette
Leatherette display gives a harder, more architectural line than fabric. The grain catches light along an edge, which defines the shape of a riser or a tray.
Wipes clean, which is why it suits trays that go on a counter and come back.
What we need from you
| What we need | Why |
|---|---|
| Height and footprint | Step depth and slot pitch together decide how many rings fit and whether the upper ones shadow the lower. |
| Leatherette colour | Matched to a Pantone reference or a swatch |
| Leatherette on this form | Each step edge has to be turned under rather than cut, which is slow and gives the sharpest ladder we make. |
Frequently asked questions
Can ring ladders be made in our brand colour?
Yes — the leatherette is matched to a Pantone reference or a physical swatch, and confirmed on a sample.
What sizes do ring ladders come in?
They are made to your dimensions. Step depth and slot pitch together decide how many rings fit and whether the upper ones shadow the lower. A steeper ladder fits more and shows less; a shallower one shows every ring but takes more case height.
Is leatherette a good choice for a ring ladder?
Each step edge has to be turned under rather than cut, which is slow and gives the sharpest ladder we make. Rings sit by shape rather than friction, so the slot width has to be right the first time.
What goes wrong most often with ring ladders?
A ladder cut for plain bands will not take the same range once a set stone is added — the stone fouls the step above. Cut the steps to the tallest setting in the range, not the average.
Can ring ladders be made to match our boxes?
Yes — the same leatherette and the same colour across boxes and display, ordered in one run.
Specify your ring ladders
Tell us your case or window height, what the ring ladders have to show, and your brand colour. We’ll send photos of our work and one clear, all-in quote.