HomeGuides › Microfibre Suede Brooch Boxes
Made to Order · Since 1971

Microfibre Suede Brooch Boxes

Brooch boxes in microfibre suede, made to your dimensions and your logo. The pin has to be housed under a bar or through a slit so it is captive. Laid loose, a brooch turns and an open pin marks the lining. Brooches are read face-on, so the interior is a pad rather than a well and the piece sits proud when the lid opens.

Microfibre Suede Brooch Boxes made to order by Chung Ngai, Hong Kong
Signature box in black — contrast lining, blind-debossed lid

What a brooch box has to do

The pin has to be housed under a bar or through a slit so it is captive. Laid loose, a brooch turns and an open pin marks the lining.

The moment it is opened

Brooches are read face-on, so the interior is a pad rather than a well and the piece sits proud when the lid opens.

The mistake we correct most often

Laying the brooch loose on a pad. The pin turns, opens and marks the lining, and the piece arrives at an angle.

Microfibre suede on a brooch box, specifically

A pin passes through suede and the fibre closes behind it, though less completely than velvet. On a box that will be re-used many times, a slit through a suede-covered board wears better than repeated punctures.

What varies between versions

A bar the pin passes under, or a slit it passes through. The slit is cleaner to look at; the bar takes a heavier pin.

Why microfibre suede for this

Microfibre suede is a woven synthetic with a short, dense nap. It has the hand of real suede without the shading and water-marking that real suede brings, and it does not shed onto a polished piece.

Putting your logo on microfibre suede

Suede takes a hot-stamped or blind-debossed logo cleanly, because the nap compresses and holds the impression. Fine serifs need a slightly heavier die than they would on board, or the nap springs back and softens the edge.

Cutting the interior in microfibre suede

Inserts are cut a fraction under size on each face; the pile closes the gap and grips the piece without a visible squeeze.

Brush with the nap, never against it. Marks from a fingernail lift with a soft brush. It does not craze or crack with age.

What we need from you

What we needWhy
Brooch dimensionsSets the interior
Exterior and lining colourMatched to a reference or swatch
Logo artworkVector gives the cleanest die or screen
Quantity in mindShapes what we propose
Microfibre suede for this pieceA pin passes through suede and the fibre closes behind it, though less completely than velvet.

Frequently asked questions

Is microfibre suede a good choice for a brooch box?

A pin passes through suede and the fibre closes behind it, though less completely than velvet. On a box that will be re-used many times, a slit through a suede-covered board wears better than repeated punctures.

How does microfibre suede behave in use?

Brush with the nap, never against it. Marks from a fingernail lift with a soft brush. It does not craze or crack with age.

What logo methods suit microfibre suede?

Suede takes a hot-stamped or blind-debossed logo cleanly, because the nap compresses and holds the impression. Fine serifs need a slightly heavier die than they would on board, or the nap springs back and softens the edge.

Can I see it before ordering?

Yes. A physical pre-production sample is made to your specification and the bulk run is held to the sample you approve.

Make your brooch boxes

Tell us the brooch, your brand and the quantity you have in mind. We’ll send photos of our work and one clear, all-in quote.