HomeGuides › Microfibre Suede Engagement Ring Boxes
Made to Order · Since 1971

Microfibre Suede Engagement Ring Boxes

Engagement ring boxes in microfibre suede, made to your dimensions and your logo. The slot has to hold the shank and the lid has to clear the setting. Setting height is the measurement most briefs leave out. It is opened once, in front of someone, and often on camera. That is a different brief from a counter box.

Microfibre Suede Engagement Ring Boxes made to order by Chung Ngai, Hong Kong
Signature ring box — burgundy exterior, twin-pad slotted insert

What a engagement ring box has to do

The slot has to hold the shank and the lid has to clear the setting. Setting height is the measurement most briefs leave out.

The moment it is opened

It is opened once, in front of someone, and often on camera. That is a different brief from a counter box.

The mistake we correct most often

Briefs give the ring size and leave out the setting height. A slot cut to the shank alone means the lid closes on the stone. We work from the height of the setting, not the size of the finger.

Microfibre suede on a engagement ring box, specifically

Microfibre suede has a shorter, more uniform nap than velvet, so a ring slot cut in it holds its edge sharply. Where a brief asks for a crisp, modern interior rather than a soft one, this is usually the answer.

What varies between versions

A single slot or a slot with a hidden compartment for a second band; a lid that stands open at ninety degrees for a photograph or one that falls shut. Both decisions are made before the die is cut.

Why microfibre suede for this

Microfibre suede is a woven synthetic with a short, dense nap. It has the hand of real suede without the shading and water-marking that real suede brings, and it does not shed onto a polished piece.

Putting your logo on microfibre suede

Suede takes a hot-stamped or blind-debossed logo cleanly, because the nap compresses and holds the impression. Fine serifs need a slightly heavier die than they would on board, or the nap springs back and softens the edge.

Cutting the interior in microfibre suede

Inserts are cut a fraction under size on each face; the pile closes the gap and grips the piece without a visible squeeze.

Brush with the nap, never against it. Marks from a fingernail lift with a soft brush. It does not craze or crack with age.

What we need from you

What we needWhy
Engagement ring dimensionsSets the interior
Exterior and lining colourMatched to a reference or swatch
Logo artworkVector gives the cleanest die or screen
Quantity in mindShapes what we propose
Microfibre suede for this pieceMicrofibre suede has a shorter, more uniform nap than velvet, so a ring slot cut in it holds its edge sharply.

Frequently asked questions

Is microfibre suede a good choice for a engagement ring box?

Microfibre suede has a shorter, more uniform nap than velvet, so a ring slot cut in it holds its edge sharply. Where a brief asks for a crisp, modern interior rather than a soft one, this is usually the answer.

How does microfibre suede behave in use?

Brush with the nap, never against it. Marks from a fingernail lift with a soft brush. It does not craze or crack with age.

What logo methods suit microfibre suede?

Suede takes a hot-stamped or blind-debossed logo cleanly, because the nap compresses and holds the impression. Fine serifs need a slightly heavier die than they would on board, or the nap springs back and softens the edge.

Can I see it before ordering?

Yes. A physical pre-production sample is made to your specification and the bulk run is held to the sample you approve.

Make your engagement ring boxes

Tell us the engagement ring, your brand and the quantity you have in mind. We’ll send photos of our work and one clear, all-in quote.