HomeGuides › Microfibre Suede Bangle Boxes
Made to Order · Since 1971

Microfibre Suede Bangle Boxes

Bangle boxes in microfibre suede, made to your dimensions and your logo. A bangle is rigid and round, so it needs a circular well or a raised centre post that holds the ring of it upright. Laid flat in a rectangular cavity it rolls and knocks its own edge. Bangles are often bought in pairs or worn stacked, so a box that takes two side by side sells better than one that takes a single.

Microfibre Suede Bangle Boxes made to order by Chung Ngai, Hong Kong
Signature box — pale exterior with a contrast lining

What a bangle box has to do

A bangle is rigid and round, so it needs a circular well or a raised centre post that holds the ring of it upright. Laid flat in a rectangular cavity it rolls and knocks its own edge.

The moment it is opened

Bangles are often bought in pairs or worn stacked, so a box that takes two side by side sells better than one that takes a single.

The mistake we correct most often

A rectangular cavity. A bangle is a rigid ring — laid in a rectangle it rolls onto its own edge and knocks against the wall of the box.

Microfibre suede on a bangle box, specifically

A suede-covered well suits a plain bangle, because the short nap does not fill the gap between the bangle and the wall. Where the bangle is set with stones, a post covered in something softer protects the settings better.

What varies between versions

A circular well, or a raised centre post the bangle sits over. The post holds it upright and shows the profile; the well is quieter.

Why microfibre suede for this

Microfibre suede is a woven synthetic with a short, dense nap. It has the hand of real suede without the shading and water-marking that real suede brings, and it does not shed onto a polished piece.

Putting your logo on microfibre suede

Suede takes a hot-stamped or blind-debossed logo cleanly, because the nap compresses and holds the impression. Fine serifs need a slightly heavier die than they would on board, or the nap springs back and softens the edge.

Cutting the interior in microfibre suede

Inserts are cut a fraction under size on each face; the pile closes the gap and grips the piece without a visible squeeze.

Brush with the nap, never against it. Marks from a fingernail lift with a soft brush. It does not craze or crack with age.

What we need from you

What we needWhy
Bangle dimensionsSets the interior
Exterior and lining colourMatched to a reference or swatch
Logo artworkVector gives the cleanest die or screen
Quantity in mindShapes what we propose
Microfibre suede for this pieceA suede-covered well suits a plain bangle, because the short nap does not fill the gap between the bangle and the wall.

Frequently asked questions

Is microfibre suede a good choice for a bangle box?

A suede-covered well suits a plain bangle, because the short nap does not fill the gap between the bangle and the wall. Where the bangle is set with stones, a post covered in something softer protects the settings better.

How does microfibre suede behave in use?

Brush with the nap, never against it. Marks from a fingernail lift with a soft brush. It does not craze or crack with age.

What logo methods suit microfibre suede?

Suede takes a hot-stamped or blind-debossed logo cleanly, because the nap compresses and holds the impression. Fine serifs need a slightly heavier die than they would on board, or the nap springs back and softens the edge.

Can I see it before ordering?

Yes. A physical pre-production sample is made to your specification and the bulk run is held to the sample you approve.

Make your bangle boxes

Tell us the bangle, your brand and the quantity you have in mind. We’ll send photos of our work and one clear, all-in quote.