What a pair of earrings box has to do
Studs sit in punched holes with the posts passing through; drops hang from a slit or bar. One interior rarely serves both well.
The moment it is opened
Earrings are bought in pairs and must read as a pair — level with each other, at the same height.
The mistake we correct most often
One interior for both studs and drops. Studs sit in punched holes with the posts through; drops hang from a slit or bar. An interior that half-suits both suits neither.
Leatherette (PU) on a pair of earrings box, specifically
Studs cannot be pushed through leatherette. An earring interior here uses a fabric-covered panel for the holes or the slit, with leatherette around it — which is a two-material interior and needs to be planned at drawing stage.
What varies between versions
Holes, a slit, or a bar. Holes for studs, a slit for light drops, a bar where the piece is heavy enough to need it.
Why leatherette (pu) for this
Leatherette is a polyurethane skin over a woven backing. It gives the grain and the weight of leather at a consistent colour, batch to batch — which matters when a jeweller is reordering a house box for years.
Putting your logo on leatherette (pu)
Leatherette is the most forgiving surface for a logo. Hot-stamp, blind deboss and metal plate all sit well on it, and a fine typeface holds its detail.
Cutting the interior in leatherette (pu)
The skin is wrapped over a rigid shell, so corners stay square and the lid closes on a defined line rather than a soft one.
Wipe with a barely damp cloth. Avoid solvent cleaners, which can lift the surface.
What we need from you
| What we need | Why |
|---|---|
| Pair of earrings dimensions | Sets the interior |
| Exterior and lining colour | Matched to a reference or swatch |
| Logo artwork | Vector gives the cleanest die or screen |
| Quantity in mind | Shapes what we propose |
| Leatherette (PU) for this piece | Studs cannot be pushed through leatherette. |
Frequently asked questions
Is leatherette (pu) a good choice for a pair of earrings box?
Studs cannot be pushed through leatherette. An earring interior here uses a fabric-covered panel for the holes or the slit, with leatherette around it — which is a two-material interior and needs to be planned at drawing stage.
How does leatherette (pu) behave in use?
Wipe with a barely damp cloth. Avoid solvent cleaners, which can lift the surface.
What logo methods suit leatherette (pu)?
Leatherette is the most forgiving surface for a logo. Hot-stamp, blind deboss and metal plate all sit well on it, and a fine typeface holds its detail.
Can I see it before ordering?
Yes. A physical pre-production sample is made to your specification and the bulk run is held to the sample you approve.
Make your earring boxes
Tell us the pair of earrings, your brand and the quantity you have in mind. We’ll send photos of our work and one clear, all-in quote.