What a pair of earrings box has to do
Studs sit in punched holes with the posts passing through; drops hang from a slit or bar. One interior rarely serves both well.
The moment it is opened
Earrings are bought in pairs and must read as a pair — level with each other, at the same height.
The mistake we correct most often
One interior for both studs and drops. Studs sit in punched holes with the posts through; drops hang from a slit or bar. An interior that half-suits both suits neither.
Rigid board on a pair of earrings box, specifically
Punched holes go through a printed board panel cleanly and the print can carry the brand right up to the holes. For online sellers this is the most cost-effective earring interior there is.
What varies between versions
Holes, a slit, or a bar. Holes for studs, a slit for light drops, a bar where the piece is heavy enough to need it.
Why rigid board for this
Board wrapped in paper or textured stock. The lightest and most shippable of the constructions, and the one that gives the widest colour and texture range.
Putting your logo on rigid board
Board is the best surface of all for print. Foil, deboss, spot varnish and flat colour all work, and fine typography holds.
Cutting the interior in rigid board
A board box is built around its insert; the insert is usually a die-cut foam or board platform wrapped in the lining material.
Keep dry. Board recovers from a light knock better than lacquer, but a wet mark is permanent.
What we need from you
| What we need | Why |
|---|---|
| Pair of earrings dimensions | Sets the interior |
| Exterior and lining colour | Matched to a reference or swatch |
| Logo artwork | Vector gives the cleanest die or screen |
| Quantity in mind | Shapes what we propose |
| Rigid board for this piece | Punched holes go through a printed board panel cleanly and the print can carry the brand right up to the holes. |
Frequently asked questions
Is rigid board a good choice for a pair of earrings box?
Punched holes go through a printed board panel cleanly and the print can carry the brand right up to the holes. For online sellers this is the most cost-effective earring interior there is.
How does rigid board behave in use?
Keep dry. Board recovers from a light knock better than lacquer, but a wet mark is permanent.
What logo methods suit rigid board?
Board is the best surface of all for print. Foil, deboss, spot varnish and flat colour all work, and fine typography holds.
Can I see it before ordering?
Yes. A physical pre-production sample is made to your specification and the bulk run is held to the sample you approve.
Make your earring boxes
Tell us the pair of earrings, your brand and the quantity you have in mind. We’ll send photos of our work and one clear, all-in quote.