What it does
A bangle stand holds a rigid bangle or a cuff upright so the profile is seen rather than the top edge. Laid flat, a bangle shows a circle; stood up, it shows its shape.
Velvet on a bangle stand, specifically
A velvet-covered arm stops a bangle rattling down to the base, because the pile takes up the play. On a bare arm the same bangle slides and knocks the one below it.
Getting the proportion right
A T-bar takes several bangles in a stack; a single post takes one and gives it more presence. Which you want depends on whether you are showing a range or a piece.
How velvet is applied to a display form
Velvet is glued over the form and the pile has to run the same way on every face, or one side of the same block reads darker than the other. On a curved form it is cut in panels rather than stretched, because pile flattens where it is pulled.
Where it is used
Counter cases and window displays for bangles, cuffs and wide bracelets.
Velvet under case lighting
Pile absorbs light instead of bouncing it, so a velvet display sinks into the background and the piece on it becomes the brightest thing in the case. It also means the display itself photographs dark, which suits a shop and not a catalogue shot.
The mistake to avoid
A stack on a T-bar hides everything except the outermost bangle. For a range where each piece is different, separate posts read better.
Why velvet
Velvet-covered display reads as traditional and formal. The pile absorbs light rather than reflecting it, so the piece on top is the brightest thing in the case.
The pile shows handling and dust. Velvet display belongs behind glass, brushed regularly; on an open counter it ages faster than suede.
What we need from you
| What we need | Why |
|---|---|
| Height and footprint | A T-bar takes several bangles in a stack; a single post takes one and gives it more presence. |
| Velvet colour | Matched to a Pantone reference or a swatch |
| Velvet on this form | A velvet-covered arm stops a bangle rattling down to the base, because the pile takes up the play. |
Frequently asked questions
Can bangle stands be made in our brand colour?
Yes — the velvet is matched to a Pantone reference or a physical swatch, and confirmed on a sample.
What sizes do bangle stands come in?
They are made to your dimensions. A T-bar takes several bangles in a stack; a single post takes one and gives it more presence. Which you want depends on whether you are showing a range or a piece.
Is velvet a good choice for a bangle stand?
A velvet-covered arm stops a bangle rattling down to the base, because the pile takes up the play. On a bare arm the same bangle slides and knocks the one below it.
What goes wrong most often with bangle stands?
A stack on a T-bar hides everything except the outermost bangle. For a range where each piece is different, separate posts read better.
Can bangle stands be made to match our boxes?
Yes — the same velvet and the same colour across boxes and display, ordered in one run.
Specify your bangle stands
Tell us your case or window height, what the bangle stands have to show, and your brand colour. We’ll send photos of our work and one clear, all-in quote.