What a locket box has to do
A locket is thick and hinged, and it is opened by the customer in the shop. The seat has to take the depth and leave the edge free enough that a fingernail can get under it.
The moment it is opened
Lockets are bought for what goes inside them, so the box is often kept as long as the piece — and it is handed on with it.
The mistake we correct most often
A seat with no clearance at the edge. A locket is opened in the shop, and if a fingernail cannot get under the rim the customer cannot open it in front of you.
Rigid board on a locket box, specifically
Board takes print, and a locket is often sold with a story. Printing that story inside the lid is cheaper here than on any other material.
What varies between versions
A seat that shows the locket closed, or one that holds it open to show the interior. Lockets sold for what goes inside are often shown open.
Why rigid board for this
Board wrapped in paper or textured stock. The lightest and most shippable of the constructions, and the one that gives the widest colour and texture range.
Putting your logo on rigid board
Board is the best surface of all for print. Foil, deboss, spot varnish and flat colour all work, and fine typography holds.
Cutting the interior in rigid board
A board box is built around its insert; the insert is usually a die-cut foam or board platform wrapped in the lining material.
Keep dry. Board recovers from a light knock better than lacquer, but a wet mark is permanent.
What we need from you
| What we need | Why |
|---|---|
| Locket dimensions | Sets the interior |
| Exterior and lining colour | Matched to a reference or swatch |
| Logo artwork | Vector gives the cleanest die or screen |
| Quantity in mind | Shapes what we propose |
| Rigid board for this piece | Board takes print, and a locket is often sold with a story. |
Frequently asked questions
Is rigid board a good choice for a locket box?
Board takes print, and a locket is often sold with a story. Printing that story inside the lid is cheaper here than on any other material.
How does rigid board behave in use?
Keep dry. Board recovers from a light knock better than lacquer, but a wet mark is permanent.
What logo methods suit rigid board?
Board is the best surface of all for print. Foil, deboss, spot varnish and flat colour all work, and fine typography holds.
Can I see it before ordering?
Yes. A physical pre-production sample is made to your specification and the bulk run is held to the sample you approve.
Make your locket boxes
Tell us the locket, your brand and the quantity you have in mind. We’ll send photos of our work and one clear, all-in quote.