What it does
A ring slot tray is a shallow tray with a row of slots, so a range of rings is shown together, upright and in order. It is how a graded range is presented and how it is put back correctly at the end of the day.
Metal on a ring slot tray, specifically
A metal tray is a trade item rather than a retail one. Bare metal marks a polished shank within a week of counter use, so the slots must be faced if customers will see the tray.
Getting the proportion right
Slot pitch and depth decide how many rings fit and how they read. Slots too close and the rings touch; too far apart and the tray looks half empty. The pitch should be set from the widest shank in the range, not the average.
How metal display is made
Metal display is formed and plated or powder-coated rather than covered. The finish is decided at the plating stage and cannot be adjusted afterwards, so the sample matters more here than on any wrapped material.
Where it is used
Counter cases showing a graded range, and back-of-house storage where the same tray goes into the safe overnight. That double use is the reason it is worth specifying properly.
Metal under case lighting
A polished metal display throws hard reflections and will bounce a spot straight back at the customer. Brushed and matt finishes are the usual specification in a lit case; polish belongs in a window where the light is controlled.
The mistake to avoid
A tray cut for plain bands will not take the same range once a set stone is added. Where the range includes both, the slots are cut to the widest and the plain bands simply sit lower.
Why metal
Metal display — brass, gold finish, black or silver — gives the thinnest possible support. A metal stand almost disappears, which is the point: the piece appears to float.
Wipe with a dry cloth. A brushed finish hides handling better than a polished one.
What we need from you
| What we need | Why |
|---|---|
| Height and footprint | Slot pitch and depth decide how many rings fit and how they read. |
| Metal colour | Matched to a Pantone reference or a swatch |
| Metal on this form | A metal tray is a trade item rather than a retail one. |
Frequently asked questions
Can ring slot trays be made in our brand colour?
Yes — the metal is matched to a Pantone reference or a physical swatch, and confirmed on a sample.
What sizes do ring slot trays come in?
They are made to your dimensions. Slot pitch and depth decide how many rings fit and how they read. Slots too close and the rings touch; too far apart and the tray looks half empty. The pitch should be set from the widest shank in the range, not the average.
Is metal a good choice for a ring slot tray?
A metal tray is a trade item rather than a retail one. Bare metal marks a polished shank within a week of counter use, so the slots must be faced if customers will see the tray.
What goes wrong most often with ring slot trays?
A tray cut for plain bands will not take the same range once a set stone is added. Where the range includes both, the slots are cut to the widest and the plain bands simply sit lower.
Can ring slot trays be made to match our boxes?
Yes — the same metal and the same colour across boxes and display, ordered in one run.
Specify your ring slot trays
Tell us your case or window height, what the ring slot trays have to show, and your brand colour. We’ll send photos of our work and one clear, all-in quote.