What a ring boxe has to do
A ring box holds a single ring upright in a fitted slot so the stone faces the customer when the lid opens. Two covered pads sit side by side with a cut between them; the ring is pushed down into the cut and the foam closes on the shank under its own spring.
Why Rose Blush
A press stud instead of a hinge keeps the profile thin, so the box goes in a bag without bulk. Blush with rose gold reads as a gift before it is opened.
Getting the interior right
The cut is set to the widest shank the box has to take. A slot cut for a 1.5 mm band will not seat a 4 mm signet, and a slot cut for the signet lets the band lie over. Give both extremes if the box covers a range.
Where it belongs
Gifting, e-commerce and pieces that travel home in a handbag.
The mistake to avoid
The measurement most often left out is the height of the setting. A raised solitaire needs clearance under the lid, and without it the lid presses on the stone.
Worth knowing before you commit
A press stud is a wear point. It is right for a gift box that will be opened a handful of times, not for a display box opened twenty times a day.
Leather
Real leather has variation in it — a slight difference in grain and in depth of colour from hide to hide. That is the point of it, and it is also the thing to decide before you commit to a house box.
What we need from you
| What we need | Why |
|---|---|
| Dimensions | The widest shank width, the height from the base of the shank to the top of the setting, and whether the box has to take a range or a single width. |
| Exterior colour | Matched to a Pantone reference or a physical swatch |
| Lining colour | Chosen against the metal and the stone |
| Logo artwork | Vector where possible, for the cleanest die or screen |
Frequently asked questions
Can the Rose Blush series be made in a different colour?
Yes. The colour shown is the standard for the series; exterior, lining and stitching are all specified per order. Send a Pantone reference or a swatch and we match to it, then confirm on a sample.
What logo methods suit leather?
Leather holds a deep blind deboss beautifully and takes foil well, though foil on a heavily grained hide will break slightly along the grain — usually read as character rather than fault.
What do you need to make a ring boxe?
The widest shank width, the height from the base of the shank to the top of the setting, and whether the box has to take a range or a single width.
Can I see it before ordering?
Yes. A physical pre-production sample is made to your specification and the bulk run is held to the sample you approve.
Make this in Rose Blush
Tell us the ring, your brand and the quantity — we'll send photos of our work and one clear, all-in quote.