What a ring boxe has to do
A ring box holds a single ring upright in a fitted slot so the stone faces the customer when the lid opens. Two covered pads sit side by side with a cut between them; the ring is pushed down into the cut and the foam closes on the shank under its own spring.
Why Espresso
Deep coffee holds yellow gold and warm stones — citrine, amber, smoky quartz — without the hard edge that black gives. Tonal stitching keeps the eye on the piece.
Getting the interior right
The cut is set to the widest shank the box has to take. A slot cut for a 1.5 mm band will not seat a 4 mm signet, and a slot cut for the signet lets the band lie over. Give both extremes if the box covers a range.
Where it belongs
Wood-fitted interiors and heritage shops, where a black box reads as a gap in the display.
The mistake to avoid
The measurement most often left out is the height of the setting. A raised solitaire needs clearance under the lid, and without it the lid presses on the stone.
Worth knowing before you commit
Brown is less forgiving than black when a customer wants an exact match years later. Specify the reference now and keep it on file with us, and repeat orders will hold.
Leatherette (PU)
Leatherette is a polyurethane skin over a woven backing. It gives the grain and the weight of leather at a consistent colour, batch to batch — which matters when a jeweller is reordering a house box for years.
What we need from you
| What we need | Why |
|---|---|
| Dimensions | The widest shank width, the height from the base of the shank to the top of the setting, and whether the box has to take a range or a single width. |
| Exterior colour | Matched to a Pantone reference or a physical swatch |
| Lining colour | Chosen against the metal and the stone |
| Logo artwork | Vector where possible, for the cleanest die or screen |
Frequently asked questions
Can the Espresso series be made in a different colour?
Yes. The colour shown is the standard for the series; exterior, lining and stitching are all specified per order. Send a Pantone reference or a swatch and we match to it, then confirm on a sample.
What logo methods suit leatherette (pu)?
Leatherette is the most forgiving surface for a logo. Hot-stamp, blind deboss and metal plate all sit well on it, and a fine typeface holds its detail.
What do you need to make a ring boxe?
The widest shank width, the height from the base of the shank to the top of the setting, and whether the box has to take a range or a single width.
Can I see it before ordering?
Yes. A physical pre-production sample is made to your specification and the bulk run is held to the sample you approve.
Make this in Espresso
Tell us the ring, your brand and the quantity — we'll send photos of our work and one clear, all-in quote.