What a ring boxe has to do
A ring box holds a single ring upright in a fitted slot so the stone faces the customer when the lid opens. Two covered pads sit side by side with a cut between them; the ring is pushed down into the cut and the foam closes on the shank under its own spring.
Why Bespoke Chest
A slotted chest is drawn around a specific collection, so each component sits in its own seat and nothing moves when the chest is carried.
Getting the interior right
The cut is set to the widest shank the box has to take. A slot cut for a 1.5 mm band will not seat a 4 mm signet, and a slot cut for the signet lets the band lie over. Give both extremes if the box covers a range.
Where it belongs
High-jewellery houses and collections shown as a group rather than piece by piece.
The mistake to avoid
The measurement most often left out is the height of the setting. A raised solitaire needs clearance under the lid, and without it the lid presses on the stone.
Worth knowing before you commit
A bespoke layout cannot be reordered from a catalogue later. Once the layout is right it should be recorded as a drawing, or a second chest years later will not match the first.
Rigid board
Board wrapped in paper or textured stock. The lightest and most shippable of the constructions, and the one that gives the widest colour and texture range.
What we need from you
| What we need | Why |
|---|---|
| Dimensions | The widest shank width, the height from the base of the shank to the top of the setting, and whether the box has to take a range or a single width. |
| Exterior colour | Matched to a Pantone reference or a physical swatch |
| Lining colour | Chosen against the metal and the stone |
| Logo artwork | Vector where possible, for the cleanest die or screen |
Frequently asked questions
Can the Bespoke Chest series be made in a different colour?
Yes. The colour shown is the standard for the series; exterior, lining and stitching are all specified per order. Send a Pantone reference or a swatch and we match to it, then confirm on a sample.
What logo methods suit rigid board?
Board is the best surface of all for print. Foil, deboss, spot varnish and flat colour all work, and fine typography holds.
What do you need to make a ring boxe?
The widest shank width, the height from the base of the shank to the top of the setting, and whether the box has to take a range or a single width.
Can I see it before ordering?
Yes. A physical pre-production sample is made to your specification and the bulk run is held to the sample you approve.
Make this in Bespoke Chest
Tell us the ring, your brand and the quantity — we'll send photos of our work and one clear, all-in quote.